Categories
Gantry Machine Center
CNC Floor Milling Machine
Machine Center
CNC Grinder Machine
CNC Roll Milling Machine
CNC Turning And Mill Center NT580L
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
-
-
High rigidity and stability
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
High precision retention
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
Thermal balance of spindle
The spindle box and the saddle are mounted on the plane with the same angle, which reduces the distortion caused by the thermal deformation of the spindle box so as to ensure the thermal balance of the spindle.
High efficiency and heavy cutting
It has high rigidity bed and spindle and long-span hard rail, with 12-position hydraulic turret, ensuring that the machine tool has high efficiency and heavy cutting characteristics.
Item
Description
Unit
NT580L
Process Range
Max. swivel diameter of spindle over bed
mm
580
Max. swivel diameter of spindle over saddle
mm
280
Max.machining diameter
mm
480
Max. machining length
mm
290
Spindle
Chuck diameter
mm
φ254
Spindle nose model
-
A2-8
Taper of spindle bore
-
1:20
Max. speed
rpm
3000
Motor power
Kw
15/18.5
Travel
X axis travel
mm
260
Z axis travel
mm
700
Feed rate
X/Z axis rapid shift
m/min
18/24
Max. Cutting feed rate
m/min
10
Tool turret
Qty. Of tools
pcs
8(12 optional)
OD tool size
mm
25*25
Boring tool handle diameter
mm
φ32
Tool changing time (adjacent/far)
sec
0.68/1.5
Tailstock
Shaft diameter of tailstock
mm
95
Center taper
-
MT5
Center travel
mm
120
Tailstock travel
mm
650
Motor
X/Y/Z motors
Kw
3
Cooling pump motor
Kw
0.4
Precision
Positioning precision
mm
X/Z：0.01/0.12
Repetitive positioning precision
mm
X/Z：0.005/0.006
Reverse difference
mm
X/Z：0.006/0.012
Description
Specification
Manufacturer
Remark
CNC control system（Standard configuration）
FANUC Oi Mate TD
Spindle motor（AC servo）
Same as CNC control system
Servo unit
Same as CNC control system
Spindle set
Self-fabrication
Spindle bearing
7024C/P4.TBT.B
Ha Erbin Bearing
3 column & 1 set (front bearing）
7022C/P4.DB.A
2 column & 1 set (back bearing）
Ball screw
X/Z：3206/4008
Hanjiang
Ball screw bearing
Ha Erbin Bearing
Linear guide
Hiwin
Turret
8 stations
Changzhou Yaxing
Hydraulic station
COMPASS
Swivel oil cylinder
CH-H
Hydraulic chuck
3H-10A8（chuck）
CH-H
Hydraulic tailstock
Self-fabrication
Lubrication system
Bijur（Nanjing）
AC contractor
Schneider
Water pump motor
Korea
Categories
CNC Floor Milling Machine
Machine Center
CNC Grinder Machine
CNC Roll Milling Machine
CNC Turning And Mill Center NT580L
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
-
-
High rigidity and stability
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
High precision retention
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
Thermal balance of spindle
The spindle box and the saddle are mounted on the plane with the same angle, which reduces the distortion caused by the thermal deformation of the spindle box so as to ensure the thermal balance of the spindle.
High efficiency and heavy cutting
It has high rigidity bed and spindle and long-span hard rail, with 12-position hydraulic turret, ensuring that the machine tool has high efficiency and heavy cutting characteristics.
Item
Description
Unit
NT580L
Process Range
Max. swivel diameter of spindle over bed
mm
580
Max. swivel diameter of spindle over saddle
mm
280
Max.machining diameter
mm
480
Max. machining length
mm
290
Spindle
Chuck diameter
mm
φ254
Spindle nose model
-
A2-8
Taper of spindle bore
-
1:20
Max. speed
rpm
3000
Motor power
Kw
15/18.5
Travel
X axis travel
mm
260
Z axis travel
mm
700
Feed rate
X/Z axis rapid shift
m/min
18/24
Max. Cutting feed rate
m/min
10
Tool turret
Qty. Of tools
pcs
8(12 optional)
OD tool size
mm
25*25
Boring tool handle diameter
mm
φ32
Tool changing time (adjacent/far)
sec
0.68/1.5
Tailstock
Shaft diameter of tailstock
mm
95
Center taper
-
MT5
Center travel
mm
120
Tailstock travel
mm
650
Motor
X/Y/Z motors
Kw
3
Cooling pump motor
Kw
0.4
Precision
Positioning precision
mm
X/Z：0.01/0.12
Repetitive positioning precision
mm
X/Z：0.005/0.006
Reverse difference
mm
X/Z：0.006/0.012
Description
Specification
Manufacturer
Remark
CNC control system（Standard configuration）
FANUC Oi Mate TD
Spindle motor（AC servo）
Same as CNC control system
Servo unit
Same as CNC control system
Spindle set
Self-fabrication
Spindle bearing
7024C/P4.TBT.B
Ha Erbin Bearing
3 column & 1 set (front bearing）
7022C/P4.DB.A
2 column & 1 set (back bearing）
Ball screw
X/Z：3206/4008
Hanjiang
Ball screw bearing
Ha Erbin Bearing
Linear guide
Hiwin
Turret
8 stations
Changzhou Yaxing
Hydraulic station
COMPASS
Swivel oil cylinder
CH-H
Hydraulic chuck
3H-10A8（chuck）
CH-H
Hydraulic tailstock
Self-fabrication
Lubrication system
Bijur（Nanjing）
AC contractor
Schneider
Water pump motor
Korea
Categories
Machine Center
CNC Grinder Machine
CNC Roll Milling Machine
CNC Turning And Mill Center NT580L
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
-
-
High rigidity and stability
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
High precision retention
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
Thermal balance of spindle
The spindle box and the saddle are mounted on the plane with the same angle, which reduces the distortion caused by the thermal deformation of the spindle box so as to ensure the thermal balance of the spindle.
High efficiency and heavy cutting
It has high rigidity bed and spindle and long-span hard rail, with 12-position hydraulic turret, ensuring that the machine tool has high efficiency and heavy cutting characteristics.
Item
Description
Unit
NT580L
Process Range
Max. swivel diameter of spindle over bed
mm
580
Max. swivel diameter of spindle over saddle
mm
280
Max.machining diameter
mm
480
Max. machining length
mm
290
Spindle
Chuck diameter
mm
φ254
Spindle nose model
-
A2-8
Taper of spindle bore
-
1:20
Max. speed
rpm
3000
Motor power
Kw
15/18.5
Travel
X axis travel
mm
260
Z axis travel
mm
700
Feed rate
X/Z axis rapid shift
m/min
18/24
Max. Cutting feed rate
m/min
10
Tool turret
Qty. Of tools
pcs
8(12 optional)
OD tool size
mm
25*25
Boring tool handle diameter
mm
φ32
Tool changing time (adjacent/far)
sec
0.68/1.5
Tailstock
Shaft diameter of tailstock
mm
95
Center taper
-
MT5
Center travel
mm
120
Tailstock travel
mm
650
Motor
X/Y/Z motors
Kw
3
Cooling pump motor
Kw
0.4
Precision
Positioning precision
mm
X/Z：0.01/0.12
Repetitive positioning precision
mm
X/Z：0.005/0.006
Reverse difference
mm
X/Z：0.006/0.012
Description
Specification
Manufacturer
Remark
CNC control system（Standard configuration）
FANUC Oi Mate TD
Spindle motor（AC servo）
Same as CNC control system
Servo unit
Same as CNC control system
Spindle set
Self-fabrication
Spindle bearing
7024C/P4.TBT.B
Ha Erbin Bearing
3 column & 1 set (front bearing）
7022C/P4.DB.A
2 column & 1 set (back bearing）
Ball screw
X/Z：3206/4008
Hanjiang
Ball screw bearing
Ha Erbin Bearing
Linear guide
Hiwin
Turret
8 stations
Changzhou Yaxing
Hydraulic station
COMPASS
Swivel oil cylinder
CH-H
Hydraulic chuck
3H-10A8（chuck）
CH-H
Hydraulic tailstock
Self-fabrication
Lubrication system
Bijur（Nanjing）
AC contractor
Schneider
Water pump motor
Korea
Categories
CNC Grinder Machine
CNC Roll Milling Machine
CNC Turning And Mill Center NT580L
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
-
-
High rigidity and stability
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
High precision retention
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
Thermal balance of spindle
The spindle box and the saddle are mounted on the plane with the same angle, which reduces the distortion caused by the thermal deformation of the spindle box so as to ensure the thermal balance of the spindle.
High efficiency and heavy cutting
It has high rigidity bed and spindle and long-span hard rail, with 12-position hydraulic turret, ensuring that the machine tool has high efficiency and heavy cutting characteristics.
Item
Description
Unit
NT580L
Process Range
Max. swivel diameter of spindle over bed
mm
580
Max. swivel diameter of spindle over saddle
mm
280
Max.machining diameter
mm
480
Max. machining length
mm
290
Spindle
Chuck diameter
mm
φ254
Spindle nose model
-
A2-8
Taper of spindle bore
-
1:20
Max. speed
rpm
3000
Motor power
Kw
15/18.5
Travel
X axis travel
mm
260
Z axis travel
mm
700
Feed rate
X/Z axis rapid shift
m/min
18/24
Max. Cutting feed rate
m/min
10
Tool turret
Qty. Of tools
pcs
8(12 optional)
OD tool size
mm
25*25
Boring tool handle diameter
mm
φ32
Tool changing time (adjacent/far)
sec
0.68/1.5
Tailstock
Shaft diameter of tailstock
mm
95
Center taper
-
MT5
Center travel
mm
120
Tailstock travel
mm
650
Motor
X/Y/Z motors
Kw
3
Cooling pump motor
Kw
0.4
Precision
Positioning precision
mm
X/Z：0.01/0.12
Repetitive positioning precision
mm
X/Z：0.005/0.006
Reverse difference
mm
X/Z：0.006/0.012
Description
Specification
Manufacturer
Remark
CNC control system（Standard configuration）
FANUC Oi Mate TD
Spindle motor（AC servo）
Same as CNC control system
Servo unit
Same as CNC control system
Spindle set
Self-fabrication
Spindle bearing
7024C/P4.TBT.B
Ha Erbin Bearing
3 column & 1 set (front bearing）
7022C/P4.DB.A
2 column & 1 set (back bearing）
Ball screw
X/Z：3206/4008
Hanjiang
Ball screw bearing
Ha Erbin Bearing
Linear guide
Hiwin
Turret
8 stations
Changzhou Yaxing
Hydraulic station
COMPASS
Swivel oil cylinder
CH-H
Hydraulic chuck
3H-10A8（chuck）
CH-H
Hydraulic tailstock
Self-fabrication
Lubrication system
Bijur（Nanjing）
AC contractor
Schneider
Water pump motor
Korea
Categories
CNC Roll Milling Machine
CNC Turning And Mill Center NT580L
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
-
-
High rigidity and stability
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
High precision retention
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
Thermal balance of spindle
The spindle box and the saddle are mounted on the plane with the same angle, which reduces the distortion caused by the thermal deformation of the spindle box so as to ensure the thermal balance of the spindle.
High efficiency and heavy cutting
It has high rigidity bed and spindle and long-span hard rail, with 12-position hydraulic turret, ensuring that the machine tool has high efficiency and heavy cutting characteristics.
Item
Description
Unit
NT580L
Process Range
Max. swivel diameter of spindle over bed
mm
580
Max. swivel diameter of spindle over saddle
mm
280
Max.machining diameter
mm
480
Max. machining length
mm
290
Spindle
Chuck diameter
mm
φ254
Spindle nose model
-
A2-8
Taper of spindle bore
-
1:20
Max. speed
rpm
3000
Motor power
Kw
15/18.5
Travel
X axis travel
mm
260
Z axis travel
mm
700
Feed rate
X/Z axis rapid shift
m/min
18/24
Max. Cutting feed rate
m/min
10
Tool turret
Qty. Of tools
pcs
8(12 optional)
OD tool size
mm
25*25
Boring tool handle diameter
mm
φ32
Tool changing time (adjacent/far)
sec
0.68/1.5
Tailstock
Shaft diameter of tailstock
mm
95
Center taper
-
MT5
Center travel
mm
120
Tailstock travel
mm
650
Motor
X/Y/Z motors
Kw
3
Cooling pump motor
Kw
0.4
Precision
Positioning precision
mm
X/Z：0.01/0.12
Repetitive positioning precision
mm
X/Z：0.005/0.006
Reverse difference
mm
X/Z：0.006/0.012
Description
Specification
Manufacturer
Remark
CNC control system（Standard configuration）
FANUC Oi Mate TD
Spindle motor（AC servo）
Same as CNC control system
Servo unit
Same as CNC control system
Spindle set
Self-fabrication
Spindle bearing
7024C/P4.TBT.B
Ha Erbin Bearing
3 column & 1 set (front bearing）
7022C/P4.DB.A
2 column & 1 set (back bearing）
Ball screw
X/Z：3206/4008
Hanjiang
Ball screw bearing
Ha Erbin Bearing
Linear guide
Hiwin
Turret
8 stations
Changzhou Yaxing
Hydraulic station
COMPASS
Swivel oil cylinder
CH-H
Hydraulic chuck
3H-10A8（chuck）
CH-H
Hydraulic tailstock
Self-fabrication
Lubrication system
Bijur（Nanjing）
AC contractor
Schneider
Water pump motor
Korea
CNC Turning And Mill Center NT580L
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
-
-
High rigidity and stability
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
High precision retention
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
Thermal balance of spindle
The spindle box and the saddle are mounted on the plane with the same angle, which reduces the distortion caused by the thermal deformation of the spindle box so as to ensure the thermal balance of the spindle.
High efficiency and heavy cutting
It has high rigidity bed and spindle and long-span hard rail, with 12-position hydraulic turret, ensuring that the machine tool has high efficiency and heavy cutting characteristics.
Item
Description
Unit
NT580L
Process Range
Max. swivel diameter of spindle over bed
mm
580
Max. swivel diameter of spindle over saddle
mm
280
Max.machining diameter
mm
480
Max. machining length
mm
290
Spindle
Chuck diameter
mm
φ254
Spindle nose model
-
A2-8
Taper of spindle bore
-
1:20
Max. speed
rpm
3000
Motor power
Kw
15/18.5
Travel
X axis travel
mm
260
Z axis travel
mm
700
Feed rate
X/Z axis rapid shift
m/min
18/24
Max. Cutting feed rate
m/min
10
Tool turret
Qty. Of tools
pcs
8(12 optional)
OD tool size
mm
25*25
Boring tool handle diameter
mm
φ32
Tool changing time (adjacent/far)
sec
0.68/1.5
Tailstock
Shaft diameter of tailstock
mm
95
Center taper
-
MT5
Center travel
mm
120
Tailstock travel
mm
650
Motor
X/Y/Z motors
Kw
3
Cooling pump motor
Kw
0.4
Precision
Positioning precision
mm
X/Z：0.01/0.12
Repetitive positioning precision
mm
X/Z：0.005/0.006
Reverse difference
mm
X/Z：0.006/0.012
Description
Specification
Manufacturer
Remark
CNC control system（Standard configuration）
FANUC Oi Mate TD
Spindle motor（AC servo）
Same as CNC control system
Servo unit
Same as CNC control system
Spindle set
Self-fabrication
Spindle bearing
7024C/P4.TBT.B
Ha Erbin Bearing
3 column & 1 set (front bearing）
7022C/P4.DB.A
2 column & 1 set (back bearing）
Ball screw
X/Z：3206/4008
Hanjiang
Ball screw bearing
Ha Erbin Bearing
Linear guide
Hiwin
Turret
8 stations
Changzhou Yaxing
Hydraulic station
COMPASS
Swivel oil cylinder
CH-H
Hydraulic chuck
3H-10A8（chuck）
CH-H
Hydraulic tailstock
Self-fabrication
Lubrication system
Bijur（Nanjing）
AC contractor
Schneider
Water pump motor
Korea
CNC Turning And Mill Center NT580L
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
High rigidity and stability
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
High precision retention
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
Thermal balance of spindle
The spindle box and the saddle are mounted on the plane with the same angle, which reduces the distortion caused by the thermal deformation of the spindle box so as to ensure the thermal balance of the spindle.
High efficiency and heavy cutting
It has high rigidity bed and spindle and long-span hard rail, with 12-position hydraulic turret, ensuring that the machine tool has high efficiency and heavy cutting characteristics.
The integral 45° inclined L-shaped bed has high modality and shock resistance to realize the high rigidity of the lathe
High precision retention
The bed and the saddle are hard rails and ground after quenching, and the sliding surface is covered with a wear-resistant soft belt to reduce friction and avoid creep, ensuring high-precision retention.
Thermal balance of spindle
The spindle box and the saddle are mounted on the plane with the same angle, which reduces the distortion caused by the thermal deformation of the spindle box so as to ensure the thermal balance of the spindle.
High efficiency and heavy cutting
It has high rigidity bed and spindle and long-span hard rail, with 12-position hydraulic turret, ensuring that the machine tool has high efficiency and heavy cutting characteristics.
| Item | Description | Unit | NT580L |
| Process Range | Max. swivel diameter of spindle over bed | mm | 580 |
| Max. swivel diameter of spindle over saddle | mm | 280 | |
| Max.machining diameter | mm | 480 | |
| Max. machining length | mm | 290 | |
| Spindle | Chuck diameter | mm | φ254 |
| Spindle nose model | - | A2-8 | |
| Taper of spindle bore | - | 1:20 | |
| Max. speed | rpm | 3000 | |
| Motor power | Kw | 15/18.5 | |
| Travel | X axis travel | mm | 260 |
| Z axis travel | mm | 700 | |
| Feed rate | X/Z axis rapid shift | m/min | 18/24 |
| Max. Cutting feed rate | m/min | 10 | |
| Tool turret | Qty. Of tools | pcs | 8(12 optional) |
| OD tool size | mm | 25*25 | |
| Boring tool handle diameter | mm | φ32 | |
| Tool changing time (adjacent/far) | sec | 0.68/1.5 | |
| Tailstock | Shaft diameter of tailstock | mm | 95 |
| Center taper | - | MT5 | |
| Center travel | mm | 120 | |
| Tailstock travel | mm | 650 | |
| Motor | X/Y/Z motors | Kw | 3 |
| Cooling pump motor | Kw | 0.4 | |
| Precision | Positioning precision | mm | X/Z：0.01/0.12 |
| Repetitive positioning precision | mm | X/Z：0.005/0.006 | |
| Reverse difference | mm | X/Z：0.006/0.012 |
| Description | Specification | Manufacturer | Remark |
| CNC control system（Standard configuration） | FANUC Oi Mate TD | ||
| Spindle motor（AC servo） | Same as CNC control system | ||
| Servo unit | Same as CNC control system | ||
| Spindle set | Self-fabrication | ||
| Spindle bearing | 7024C/P4.TBT.B | Ha Erbin Bearing | 3 column & 1 set (front bearing） |
| 7022C/P4.DB.A | 2 column & 1 set (back bearing） | ||
| Ball screw | X/Z：3206/4008 | Hanjiang | |
| Ball screw bearing | Ha Erbin Bearing | ||
| Linear guide | Hiwin | ||
| Turret | 8 stations | Changzhou Yaxing | |
| Hydraulic station | COMPASS | ||
| Swivel oil cylinder | CH-H | ||
| Hydraulic chuck | 3H-10A8（chuck） | CH-H | |
| Hydraulic tailstock | Self-fabrication | ||
| Lubrication system | Bijur（Nanjing） | ||
| AC contractor | Schneider | ||
| Water pump motor | Korea |